3,088 results for your search

3D Numerical Model of the Subsoil-Structure Interaction and Comparison of the Results with Experimentally Measured Values
See details
(Switzerland: Trans Tech Publications, 2017), 13 page(s)
The influence of the physically-nonlinear behaviour of the structure and interaction between the upper structure and foundation are the aspects which influence the results of the subsoil-structure interaction analysis. The experimental measurement of stress and strain and monitoring of stress-strain relations by i...
(Switzerland: Trans Tech Publications, 2017), 13 page(s)
×
Abnormal Grain Growth on the Surface of Cold-Rolled AA1235 Aluminum Plate during the Annealing Process
See details
(Switzerland: Trans Tech Publications, 2017), 12 page(s)
AA1235 aluminum alloys were twin roll cast into a 7.0 mm-thick billet and further rolled into a plate with 70% reduction, followed by annealing at 500 C for 8 h. Abnormal grains were found to be formed on the plate bottom surface. SEM, EBSD, and micro X-ray diffraction were used to analyze the mechanism underlying...
(Switzerland: Trans Tech Publications, 2017), 12 page(s)
×
Acoustic Benefits of Ecofriendly Spent Tea Leaves Filled Porous Material
See details
(Switzerland: Trans Tech Publications, 2017), 11 page(s)
This paper demonstrates the feasibility of spent tea leaf (STL) fiber as an eco-friendly sound absorbing material. STL fiber is a by-product which was extracted from tea plant. STL are rich in polyphenols (tannins) which cause high resistance to fungal and termites, and high resistance to fire. In addition, STL ar...
(Switzerland: Trans Tech Publications, 2017), 11 page(s)
×
Actual Problems of the Safety and Reliability of the NPP Structures in Slovakia
See details
(Switzerland: Trans Tech Publications, 2017), 13 page(s)
The last accidents of the NPP in Chernobyl and Fukushima give us the new inspiration to verify the safety level of the NPP structures. This paper presents the new requirements to test of the safety and reliability of the NPP structures due to the last accidents in the world. The risk assessment to verify of the sa...
(Switzerland: Trans Tech Publications, 2017), 13 page(s)
×
Advanced Possibilities of Fast Quality Check in Wire Production Processes by Means of Fast Microstructure Analysis
See details
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
A new method for a fast analysis of heavily deformed, multicomponent ferritic/pearlitic steels microstructure based on XRD measurements had been developed. Its practical application has been examined and proven during wire rod production of a high-strength eutectoid non-alloyed steel grade containing 0.81 weight p...
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
×
AlCrFeNi High-Entropy Coating Fabricated by Mechanical Alloying and Hot Pressing Sintering
See details
(Switzerland: Trans Tech Publications, 2017)
The AlCrFeNi high entropy coating was successfully prepared by mechanical alloying and vacuum hot pressing sintering technique on Q235 steel substrate, and the microstructures and microhardness, wear resistance and corrosion resistance were characterized in detail. Results showed that single body-centered cubic so...
(Switzerland: Trans Tech Publications, 2017)
×
Allocation of the Environmental Impact in Iron and Steel Industry
See details
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
Life cycle assessment (LCA) can provide technical support for environmental management in China. However, there is no consensus on allocation method in inventory analysis. According to the World Steel Association (WAS), the environmental impact, life cycle environmental load and environmental benefit of China's ir...
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
×
Alternative Additives for Improving the Functional Characteristics and Performance-Based Behavior of Asphalt Mixes in the Fine-Grained Active Filler Form
See details
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
Deterioration of asphalt pavements by water immersion and increased moisture content, presents one of the principal issues for pavement technologists. Especially if concentrating on initial phases of the life-cycle of a pavement. Water in the form of rain precipitation and natural air moisture can be harmful to th...
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
×
Amorphous NiCoPt/Ce2O3 Nanoparticles as Highly Efficient Catalyst for Hydrogen Generation from Hydrous Hydrazine
See details
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
Hydrous hydrazine is a promising hydrogen carrier material because of its high content of hydrogen (8.0 wt.%) and easy recharging as a liquid. Amorphous Ni8.1Co1.0Pt0.9/Ce2O3 nanoparticles with low precious-metal content were synthesized by a facile co-reduction method at room temperature under ambient atmosphere....
(Switzerland: Trans Tech Publications, 2017), 10 page(s)
×
Analysis of Asymmetric High-Rise Building
See details
(Switzerland: Trans Tech Publications, 2017), 11 page(s)
This paper deals with static and dynamic analysis of asymmetric high-rise building. Two alternatives have been analysed - without dilatation and with dilatation. Then, the influence of the dilatation was discussed. The building was located in 4th seismic area in Slovakia (Bratislava). The description of the buildi...
(Switzerland: Trans Tech Publications, 2017), 11 page(s)
×

Pages